Compact and versatile Aquafog® Hydro atomizing fans can handle a variety of indoor/outdoor humidification or evaporative cooling applications. The nozzle-free fans can atomize ordinary water supplies into a very fine mist-like-fog. Utilizing high-speed centrifugal force and air flow, these units can propel a misty-fog stream up to 20 feet away.
Unlike other fog systems, all Aquafog foggers can accept ordinary water supplies, even well or pond water without the risk of clogging. The secret is in the nozzle-free, self-flushing atomization system that forces liquids through passageways in the fan blades, atomizing as the liquid exits the blades. In addition Aquafog do not require high-pressure lines. Ordinary pressurized water lines are more than enough, and units can even be gravity-fed or connected to low pressure supplies like reverse osmoses (RO) systems. By eliminating specialized pumps and filtering equipment, Aquafog saves time and reduces costs. The unique atomization process combined with the fan's forced circulation provides a quality fog with great distribution.
The Hydro SS 700 is engineered to withstand humid conditions as high as 100% relative humidity. Units are constructed of impenetrable components like Nema 4 boxes and connections, all 304 stainless steel hardware, UV stabilized polyethylene housing and precision, high strength injection molded polypropylene components.
Standard
Features
3 gallon per hour fogging capability
Consumes extremely low amounts of energy, 1.8 amps or less @ 115V
Adjustable angle fogging head
No-clog, nozzle-free atomization
Adjustable flow output w/ fog particles averaging 40 microns in size
14 foot power cord with grounded three prong plug.
15 feet of ¼" water line tubing with water hose connector
Specifications
Direct Feed (DF)
Bench Top (BT)
Hanging Sump (HS)
Fogging Capacity
0-3 GPH
0-3 GPH
0-3 GPH
CFM Rating
1,125 Cubic ft per min.
1,125 Cubic ft. per min.
1,125 Cubic ft. per min.
Energy Consumption
1.5 Amps @ 115V
1.8 Amps @ 115V
1.8 Amps @ 115V
Noise @ 10 ft.
62 dB(A)
62 dB(A)
62 dB(A)
Weight
10.5 lbs
18.5 lbs
18.5 lbs
Voltage
110 - 128 Voltz, 60Hz, 1ph
110 - 128 Volts, 60Hz, 1ph
110 - 128 Volts, 60Hz, 1ph
Coverage
About 500 sq ft. for Humidification Applications
About 300 sq. ft. for Evaporative Cooling Applications
About 500 sq ft. for Humidification Applications
About 300 sq. ft. for Evaporative Cooling Applications
About 500 sq ft. for Humidification Applications
About 300 sq. ft. for Evaporative Cooling Applications
Quick Reference Comparison Chart
DF
BT
HS
Most economically priced fogging unit
*
More economically priced automatic control packages
*
*
Supplied with a visual read, water flowmeter panel with fine adjustment capability
*
Does not require a support bar for installation
*
No drainage area needed, unit reuses the housing's condensation waster water
*
*
Comes with convenient on/off power switch and quarter turn water control valve
*
*
Most reliable unit because of fewer moving components (no pump or float valve)
*
Also works well with low pressure reverse osmoses type water supplies
This pre-wired humidistat combination water solenoid is an ideal means of control for the Hydro 700 Direct Feed unit in all applications requiring 85% or less relative humidity.
If your primary interest is in evaporative cooling, this pre-wired thermostat combination water solenoid control is what you may need to automate your SS700 Direct Feed unit.
If you want to maintain very high humid environments above 85% (RH) relative humidity, then the Cycle Timer may be the control you are looking for to automate your SS700 Direct Feed humidifier.
View Basket
