This product is a plumbing kit for the Glacier-Cor evaporative cooling system. Everything you need to plumb a Glacier-Cor 4" or 6" Distribution System. Choose kit for either submersible or centrifugal pump.
Plumbing Kit
Submersible Click on diagram to enlarge
Everything you need to plumb the Glacier-Cor distribution system using a submersible pump. Distribution system, pads, and pump need to be purchased separately. Sump, overflow pipe and drain not included.
Plumbing Kit
Centrifugal Click on diagram to enlarge
Everything you need to plumb the Glacier-Cor distribution system using a centrifugal pump. Distribution system, pads, and pump need to be purchased separately. Sump, overflow pipe and drain not included.
Accessories needed to complete the Glacier-Cor evaporative cooling system - Glacier-Cor Distribution System, 3" or 4" thick Glacier-Cor pads, and pump (see below):
Water distributor PVC pipe with metered outlet holes, top and bottom pad support material, water distributor cover, water return gutter, water strainer, float valve and miscellaneous parts and fasteners.
4" thick x 12" wide - 3' tall
Made of specially formulated cellulose paper, impregnated with insoluble anti-rot salts, stiffening saturants and wetting agents.
Determined by width chosen in drop-down box
(above)
The pump is sized for the system to supply at least 1/2 gallon of water per minute per linear foot of pad system. A sump is required (not included) and will need to be purchased locally and sized for at least 3/4 gallon capacity per square foot of pad area.
View Basket
