Description

Regular Stick formulation is ideal for year-round shading. Heavy rains will result in some removal with light brushing required for 100% removal. 5 gallon pail.

Applications Guidelines

FOR EXTERIOR USE. KOOL RAY can be used over most types of greenhouse exteriors. It can be applied by brush, roller or spray. Spray application is generally the most efficient method of applying KOOL RAY and will usually result in a more uniform shade density and more even wear. Spray tip sizes of .03, .04, .06, .08 and angles of 65° - 85° work well. Consult your supplier of spray equipment for their specific recommendations.

Dilution Ratios

KOOL RAY is a super concentrated formula designed to be diluted with water. Standard dilution rate is 1 part KOOL RAY to 15 parts water which will provide approximately 73% shading.  Ratios and shading effect can be adjusted according to the grower's particular needs. For a denser shade, several lighter, more diluted coats are recommended over a single, less diluted, heavy coat. A heavy coat can tend to cause "mud cracking" which can lead to eventual flaking and less even wear.

Coverage

Coverage will vary according to method of application, applicator, and dilution ratio. Spray will normally provide best coverage of approximately 175 sq. ft. per gallon after dilution. For instance, a 1:15 dilution of 1 gallon of KOOL RAY ULTRA to 15 gallons of water yields a total of 16 gallons of liquid shade. A 1:10 dilution yields a total of 11 gallons of shade. To determine coverage, multiply the diluted gallon amount by 175. Example - 1:15 = 16 gallons x 175 = 2800 sq. ft. 1:10 = 11 gallons x 175 = 1925 sq. ft. Higher dilution rations (less concentrated) result in a lighter shade, lower dilution ratios result in a darker shade.

Time, Temperature and Wear

Best to apply in the morning above 50°F (10°C), after dew has lifted or late afternoon. Application within 12 to 24 hours of rain may result in premature wash off. Frost will also loosen shade. Residues on new plastic can act as a release agent causing lack of adhesion and wash off of KOOL RAY ULTRA. A mist coat of ULTRA over new plastic followed by a regular application has proven effective in promoting normal adhesion and wear. Application during hot, midday sun will tend to bake the shade more quickly, thus enhancing durability. In addition, plastic glazing heated by the sun and/or worn by the weather is more porous and will promote greater adhesion. Rate of wear is also dependent on weather conditions.

Shipping 

This product ships via Ground Parcel Service.