| 1 - 30 of 30 products |
|---|
GF-PPT |
Poly Patching Tape is a single coated, 6 mil, UV stabilized, clear, polyethylene film with a high tack acrylic adhesive with a Kraft paper release liner for easy removal. View Details |
From:
$8.70
View Options
|
GF-WH8 |
This White Felt with Adhesive Backing provides a soft barrier between the greenhouse frame and cladding. Prevents heat from penetrating to poly sheet and degradation as film does not rub against the hoop. View Details |
GF-9002 |
Spring Lock is an economical way to secure coverings against high wind conditions. Click on picture to choose 6' length of PVC or Galvanized top spring section to be used with Spring Lock base (ordered separately). View Details |
From:
$1.70
View Options
|
GF-9001B |
This economical fastening system is available with either a PVC or Galvanized Spring Lock Top that fits into a Base Section. Easy way to secure both poly or shade cloth coverings in high wind conditions. Note: base section only. Complete assembly requires selection of either PVC or galvanized... View Details |
From:
$7.00
View Options
|
GF-9000-6C |
6' length of top clip used to easily secure both greenhouse poly or shade cloth when used with Tube Lock base section. Base section (GF-9000 6B) ordered separately. View Details |
GF-9000-6B |
Tube lock system is used to easily secure both greenhouse poly or shade cloth. Extruded aluminum clips are easily reusable and better secure coverings in high wind conditions. 6' section of tube lock base only. Be sure to order the top section "Tube Lock Clip" (stock number GF-9000 6C) as well. View Details |
PCP-EX-H1 |
Length of plastic profile used for joining two polycarbonate panels side by side. Clear plastic profile creates less noticable vertical seams than aluminum profiles. Available in 6, 8, or 10mm. View Details |
From:
$8.00
View Options
|
PCP-EX-H8 |
Length of plastic profile used for joining two polycarbonate panels side by side. Clear plastic profile creates less noticable vertical seams than aluminum profiles. Available in 6, 8, or 16mm. View Details |
From:
$29.00
View Options
|
PCP-EX-CN8 |
Used for finishing off at vertical corner - 8mm panels only. View Details |
PCP-EX-EB8 |
Used for joining vertical gable polycarbonate to roof panels. View Details |
PCP-EX-EC6 |
Extruded aluminum "U" channel used to finish bottom edge of twinwall polycarbonate panels. View Details |
From:
$15.15
View Options
|
PCP-EX-GB |
2" wide base section used with aluminum cap for joining two polycarbonate panels side by side. View Details |
From:
$10.50
View Options
|
PCP-EX-GC8 |
With glazing bar base this 2" wide top cap section is used to join two polycarbonate panels side by side. View Details |
From:
$7.50
View Options
|
PCP-EX-RE8 |
Used to attach twinwall polytcarbonate panels at a 6/12 pitch on the peak of gable structures. View Details |
PCP-EX-U8 |
6' length of plastic "U" profile used to finish top, bottom or side edges of polycarbonate panels. View Details |
From:
$8.00
View Options
|
GF-SPLB-DB6 |
Double section of our durable spring-lock base in 6' length. Install along endwall arches to easily attach poly roof and sidewalls on almost any type of greenhouse structure. Springlock clip sold separately. View Details |
CPCA003 |
This galvanized steel spacer is inserted between the corrugated polycarbonate panel and the building structure. This elevates the panel above flat surfaced roof purlins to avoid condensate drip. Sold in multiples of 100 only. View Details |
GA-1000 |
Used to fasten poly lock base to steel. 100 screws per bag. View Details |
GA-1005 |
Inserted between twinwall polycarbonate panel and greenhouse girt. View Details |
GA-1008 |
#9 x 1-1/4" screws used to fasten corrugated polycarbonate sheets to wood base. 100 screws with neoprene sealing washers per bag. View Details |
GA-1008L |
#9 x 2" screws used to fasten multi-wall polycarbonate sheets to wood base. Includes neoprene sealing washers. View Details |
From:
$24.00
View Options
|
GA-1009 |
#10/16 x 3/4" self drilling screws used to fasten corrugated polycarbonate panels to steel base. 100 screws with neoprene seal washer per bag. View Details |
GA-1010 |
10/16 x 1-1/4" self drilling screws used to fasten twinwall polycarbonate sheeting to either a metal base. 100 screws with 7/8" neoprene sealing washers per bag. View Details |
GA-1011 |
Used to fasten vertically overlapping corrugated polycarbonate panels. Consists of a Self-Grip Assembly includes lap fastener and a Self-Tapping Screw. Sold in quantities of 100. View Details |
SN-GC |
These aluminum clamps clip over a Snap Clamp for extra holding strength. Recommended for supporting very large pieces of fabric or in high wind applications. View Details |
From:
$1.00
View Options
|
SN-SC |
Our handy Snap Clamps allow quick and easy attachment of tarps, shade cloth or netting to any type of pipe. These durable PVC clamps are UV stabilized and frost resistant to provide many years of dependable use. View Details |
From:
$0.51
View Options
|
GF-9007 |
Used for attaching poly greenhouse film to wood framing with Bostitch tacker. 2-3/4" X 100 Yard roll. View Details |
GF-INFL |
Used to inflate two sheets of polyethylene covering for greenhouse roof and/or sidewalls. View Details |
GA-1006A |
Used to fasten glazing cap to base. 100 screws per bag. View Details |
GA-TB |
These easy to use turnbuckles are the perfect solution for just about any anchoring need. Use with our earth anchors to firmly secure greenhouses, sheds, shade cloth, tarps or just about anything to the ground. View Details |
From:
$5.50
View Options
|
| 1 - 30 of 30 products | Back to Top |
© 2012 International Greenhouse Company