When diluted and applied to dry plastic surfaces such as flexible or rigid greenhouse coverings, Sun Clear prevents the formation of water droplets. As a result the plastic remains clear resulting in up to 50% greater light transmission in your greenhouse. Helps to eliminate dripping which can be harmful to plants and annoying to personnel. Improve plant quality and yield with Sun Clear, due to less Botrytis and other plant diseases.
How to apply
Sun Clear can be applied to either dry or damp plastic. If there is a considerable amount of sweating on the plastic, the excess water should be cleared off prior to treatment with Sun Clear. Apply Sun Clear uniformily in horizontal sweeps working upwards from the ground level with spray nozzle no more than 4 inches. (100mm) from surface.
For best results
Sun Clear should be applied with a sprayer producing a forceful spray. Prepare Sun Clear dispersion immediately prior to application. Both new and old plastic materials can be treated. If new plastic is to be treated, Sun Clear is best applied 2 weeks after oily residues on the new plastic, this is to allow oxidation of adhesion on the new plastic and achieve maximum adhesion of Sun Clear. The Sun Clear coating reduces water surface tension, so that condensation occurs rather like a film and stops dripping.
Sun Clear MSDS (PDF)
Sun Clear Specifications (PDF)
|Concentration Volume||Average Dillution Volume||Coverage (Average Sq. Ft.)|