Free Shipping See Details The Evaporative Cooling Pads are a high efficiency evaporative cooling media. Constructed with high absorption cellulose Kraft paper and treated with wetting additives and anti-rot agents, the Evaporative Cooling Pads are built for a long-lasting and low maintenance life.
The Evaporative Cooling Pads are a high efficiency evaporative cooling media. Constructed with high absorption cellulose Kraft paper and treated with wetting additives and anti-rot agents, the Evaporative Cooling Pads are built for a long-lasting and low maintenance life. High quality adhesives and rigidifying agents have been added to the 110 grams per square meter virgin Kraft paper for increased resistance. Additionally, the air inlet side of the Cooling Pads have been dipped in specialized black plastic resin which helps reduce scaling and mineral buildup.
The Evaporative Cooling Pads are sold individually or in packs of five. Individual Cooling Pads are shipped via FedEx ground when possible.
Operation & Maintenance Information
To keep Evaporative Cooling Pads and media lasting the longest and performing at top efficiency, the following recommendations should be utilized:
Install the pads according to the system manufacturer's instructions
Maintain PH of the water between 6 and 8
Check and clean the distribution headers for obstructions or clogged holes
Dry the pads completely over 24 hours to prevent algae build-up
Maintain a 3-5% water bleed-off rate
Shade the pads and the sump from direct sunlight
Keep a steady, even water flow over the pads to help prevent mineral build-up
Use a soft bristled brush to clean debris and then flush the system afterward
Drain and disinfect the entire water distribution system quarterly or as needed
Do not cycle the pump with on and off times which will shorten pad life
Regularly inspect the pads for bowing, sagging or dry streaks
Remove any debris from the sump and cooling system
Algae and scale treatments, if needed, must follow manufacturer's instructions
Do not allow the bottom of the pads to sit in water
If possible, avoid outside contaminants that provide nutrients for algae growth
This item may ship via Motor Freight Carrier for free - almost anywhere in the Continental United States!
On rare occasions addresses with limited access such as islands or major metropolitan areas (ie: New York City) may incur additional delivery fees; if so, you will be contacted to confirm the extra shipping cost before your order is processed. Shipments to Alaska or Hawaii qualify for free shipping to any West Coast port. Please contact us for special shipping rates from the West Coast to Alaska or Hawaii.
Motor Freight Agreement
Full Size Semi: Your location must be able to accommodate a full size semi-truck trailer of up to 70ft. in length.
Someone Must Be Present: You or someone else authorized must be present to unload the shipment. Exact delivery date will be arranged via phone by freight company.
LTL Freight Type
Available for Drop Shipment
Item Tracking Code
Bought a 5 pack of the 48x12x4 pads to use for assembly of a portable outdoor cooler. They are excellent quality and drop the temperature from 86 degrees ambient to 62 degrees using a custom built setup at 22% humidity in Tucson, AZ. I knocked one star off because they were not packaged securely, 2 of the pads had approximately 6 inch by 4 inch chunks taken out due to shipping issues undoubtedly. Thevoutside box was damaged as well. Overall, very happy but shipping needs to be addressed.
Good product just what I needed
The product came to the house quickly and was in excellent condition. I cut them in half and am using for a swamp cooler in front of the intake louvers.
Replacements, work as expected
measure twice order once
Ordered the wrong size. Company was great at taking them back. Ordered the new size and they fit perfectly.. Will order from them again