Wire Vise For Interior Shade Kit
Item No.
SC-9003
The Quick-End Wire Vise is used for terminations at end posts. Use this size for each 12½ gauge wire on your fence. To install the Quick-End, drill a 7⁄16" hole through the end post and pull the wire through. Then put the Quick-End on the wire and tap it lightly into the hole. If final tensioning is
Description
The Quick-End Wire Vise is used for terminations at end posts. Use this size for each 12½ gauge wire on your fence.
To install the Quick-End, drill a 7⁄16" hole through the end post and pull the wire through. Then put the Quick-End on the wire and tap it lightly into the hole. If final tensioning is to be done with the Quick-End, pull the wire to the end post with a chain grab, then push the slack through the Quick-End.
Specifications
| LTL Freight Type | GROUND |
| Replenishment System | Purchase |
| Available for Drop Shipment | No |
| Turnaround | 25 |
Reviews (0)
There are no reviews yet.