In Line Dripper

Item No. IR-DG-ID
0 reviews Write a review
DIG Inline Drip Emitters offer flexibility and simplify the installation for residential drip irrigation systems. Their rate of flow depends on the inlet pressure; with higher pressure the flow will increase, with lower inlet pressure, it will decrease. The drip emitters' nominal flow rates are .5
Out of Stock (Ordering May Cause Delays) Low Stock, Order Now In Stock
1 / Each
Price
From
$3.99
price per 1 / Each
excl. tax
» Volume Discount Available «
This product cannot be ordered at the moment.
Description

DIG Inline Drip Emitters offer flexibility and simplify the installation for residential drip irrigation systems. Their rate of flow depends on the inlet pressure; with higher pressure the flow will increase, with lower inlet pressure, it will decrease. The drip emitters' nominal flow rates are .5 and 1 GPH at 15 PSI. Available in packs of 10 and 25, these emitters are ideal for use with 1/4" micro tubing as the main line in pots, baskets, planter boxes, vegetable gardens and for low-pressure gravity feed systems. Install the drip emitters "inline" as needed in any spacing with the 1/4" micro tubing as the main line.

Features

  • Color-coded to easily identify flow rate
  • The drip emitters can be installed where desired along the 1/4" micro tubing
  • Ideal for a loop-type layout
  • Turbulent flow through a labyrinth-water-passage design reduces likelihood of clogging
  • Uniform flow rate at low pressure
  • 1/4" barbed inlet and outlet for installation into 1/4" micro tubing
  • Resistant to chemicals and fertilizers used in landscape applications
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions

Specifications

  • Operating pressure range: 5 to 25 PSI
  • Recommended operating pressure: 25 PSI (use with 25-PSI pressure regulator)
  • Flow rates and color codes:
    • .5 GPH color code – red
    • 1 GPH color code – black
  • Inlet side: 1/4" barb
  • Outlet side: 1/4" barb
  • Filter requirement: minimum of 150 mesh
  • Material: polypropylene

Flow rate in gallon per hour @ 5 to 30 PSI

ColorRedBlack
Nominal Flow rate0.5 GPH1 GPH
5 PSI0.230.57
10 PSI 0.34 0.81
15 PSI0.420.98
20 PSI0.51.15
25 PSI 0.561.21
30 PSI0.621.41

Maximum number of .5 GPH red button inline drip emitters

  • on 1/4" vinyl micro tubing with .156 ID
DRIP EMITTERS SPACING1'2'3'4'
Flow rate @ 25 PSI0.560.56 0.560.56
Maximum length 22364856
Flow rate in GPM 0.21 0.17 0.15 0.13
Flow rate in GPH12.310.19.07.8
# of drip emitters221816 14
Velocity (f/s)3.532.862.522.18
Total head loss in PSI5.115.595.885.27

Maximum number of 1 GPH black button inline drip emitters

  • on 1/4" vinyl micro tubing with .156 ID
DRIP EMITTERS SPACING1'2'3'4'
Flow rate @ 25 PSI1.211.211.211.21
Maximum length 14222736
Flow rate in GPM 0.28 0.22 0.18 0.18
Flow rate in GPH16.913.310.910.9
# of drip emitters141199
Velocity (f/s)4.73.693.023.02
Total head loss in PSI5.95.764.356.30
Specifications
Replenishment System Purchase
Available for Drop Shipment No
Item Tracking Code PARENT
Reviews (0)
There are no reviews yet.
    Loading
    Loading