Touch N' Flow Pro Rain Wands are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, and 48-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, 3/4" forged brass
Touch N' Flow Pro Rain Wands are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, and 48-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, 3/4" forged brass hose couplings and a comfort hand grip.
36" (w/ 90 degree bend)
48" (w/ 90 degree bend)
LTL Freight Type
Available for Drop Shipment
Item Tracking Code
When you pull up the handle it engages a small valve on the wand that lets the water flow. That valve leaks badly. It was OK for three seasons of home/deck watering, then got gradually worse. It has to be thrown out now. Made in USA? We can do better than that!
Reduces water flow
Very good quality wand. It would be excellent with the 170 breaker. However, the internal parts of the valve are too small, and it drastically reduces water flow with the 400 breaker. I wish Greenhouse Megastore carried the same wand without the valve. It IS available. I have been using my 400AL breaker attached directly to the hose.
Touch N' Flow Pro Rain Wand - 36
The wand is good. Since I select a wrong bend for my use I am not happy and can't use it as much as I want.
size was listed as 24 but it only measured 22. Emails went unanswered.
Came with the Dramm water breaker, which is great. But this wand leaks no matter what I do. The rubber O ring doesn't stop leaks, I've tried using other O rings or two O rings and it always leaks where it connects to the hose.
Very well made. Bestwatering tool I have everowned. would recommend itto anyone.
This is a professional grade quality product such as is used in commercial greenhouses and garden centers. A good value!
the rain wand at present performs well as advertised....concerned of long term durability...aluminum tubing is light, but easily bent and the male hose end is also relatively light duty....would like to see a heavier duty model acknowledging there would be a weight increase....thanks
Best ever should have purchased one long time ago. Also bought the Dramm 170AL water breaker and a brass shut off valve.
Used to use the spray nozzles that you can by anywhere for watering plants. This would get all the leaves all wet and I didn't always want that.I've had my wand for about a month and really like it. I have low water pressure on outside faucets and this along with the 170PL head make it so I can still get the rain affect and reach to underneath the foliage in my 3' wide raised garden beds. I also like that it has the shutoff valve incorporated into your grip versus having to use you hand to turn off manually like other models.Sometimes though the hose kinks right by the handle. Maybe because I got the 30 wand.
This is a solidly built, excellent product. I use it with the spray mist nozzle, which is an exceptional combination. Highly recommended.
Exactly what I needed
This was exactly what I needed to reach into difficult to access places in my garden. Works great!
Constantly Needs Replacing
It's a great wand, however, the wand itself separates from the handle within one season of use. Luckily the wands are cheap and can be easily replaced.
Touch N' Flow Pro Rain Wand
Plastic water flow snapped off after very few uses. No way to repair it or to even use it.
Excellent balanced wand with integral valve
I have both the former wand (without valve) and this new one. While they're both well made and balanced, the new one incorporates a brass, spring-loaded shut off which appears to be well made. It is easy to use and it eliminates a need to buy an additional valve. The only improvement would be a 2 or 3 position lock that would enable the user to set it for a reduced water flow. As built, it's either full on or full off.
I loved it UNTIL it started to leak and the clamp to hold down the handle broke off within the first two weeks.
This is a good wand for watering. It has two flaws--1) the valve leaks a bit, which puts water drops on plants under the handle, and 2) the tube holds water, which dumps out if you fail to tip it up after watering a plant under the gushing tip.
Very nice wands
Waste of money
When the handle breaks, and it does so quickly, the wand is useless because it does not have a hose thread. Having been a horticulturist for years I've used various incarnation of wands and this one is worthless and poorly made. Besides, it causes your proportioners to malfunction.
Awesome watering tool! So handy I will never be without several again!
Bought 48 90 degree waterwand to use with siphon (other item bought separately). PERFECT for proper water flow with siphoned fertilizer. Also great w/o siphon for watering. At a low flow, I have hooked it over a very high hanging basket and walked away for a long slow soak....
Perfect for watering hanging pot and basket in the top of the greenhouse.
Perfect for hard to reach plants at the back
Light weight is great for hand watering a 1/2 acre rose garden. Long length allows perfectly aimed watering w/o getting tangled in thorny branches. Highly recommend. Light weight does not tire out my arms.
Lightweight and perfect for watering big garden
I like the light weight of these watering wands. I have a 1/2 acre garden of roses and ornamentals. I water the roses individually so I can keep a close eye on each plant's condition.
Not a stretch
Have you ever found yourself doing something difficult and wondering why there was not a better way? Well after purchasing the 48 inch Handi-Reach Handle I found I no more had to drag a step ladder and risking a fall to get to water the top shelfs in the greenhouse. My life just became easy with the purchase of this item and all at a small price and its well built to boot.