Inflation Blower 60 CFM
The 60 CFM Inflation Blower is designed for inflating a double poly roof or any variety of applications. The housing is steel with a finish of baked gray enamel. UL Component Recognized and CSA Certified.
Also available: Poly Inflation Fan Kit
|CFM @ 0 SP||60|
|Full Load Amps||0.95 / 0.74|
|Inlet Diameter||3 1/8"|
|Outlet Diameter||2 1/8"|
|Wheel Width||1 7/8"|
|Wheel Diameter||3 13/16"|
I bought one earlier and it works great! Never had a hoop greenhouse before so this is new to me. I'm very satisfied with how it works and bought a second one for a backup just in case the first one stops working.
1/125 hp but is working great so far.
I have a 15 x 25 shelter-logic structure with double layer 6M plastic for Catskill mountain winter. (Upstate NY) While this blower is sufficient to inflate the plastic over several minutes, if for any reason it is turned off for a few minutes, the condensation it has pushed between the plastic makes the layers stick together. It does not create enough pressure to separate them again. I had to use a vacuum cleaner on blow-mode, cut a second hole and blow that in while the blower was running. That will get me by, but depending on the size of your greenhouse, you may want to consider a higher volume blower for a few bucks more before you buy. You can always add venting it if the pressure is too high. But you can't get more pressure out of a sub-standard blower.
I had blower that failed from a different company and this new unit fit the other mounting and is working better than the old unit. Great!
THIS IS A QUALITY BLOWER FOR A GREAT PRICE, WORKS GREAT OUT OF THE BOX AND IS MADE OF MATERIALS THAT WILL LAST LONGER IN A MOIST GREENHOUSE INVIORMENT.
this fan replaced a similar old one. It arrived quickly. I appreciated the fact that I could speak with a live person for help. Great service and fast delivery.
Thanks for the great item and it works great.
The Fan works Great to inflate my greenhouse. My only Complaint would be the three holes for mounting the unit should be turned because you cant drive a screw thru one of the hole due to it being covered by the fan. Otherwise great unit
I was looking to replace my old inflation fan and this one was a perfect match. However it is noisier than the old one. Kind of spoils the relaxation of working in the greenhouse. I'd have been OK with paying a little more for a better bearing or whatever.