Modine HD60 Unit Heater
The HD60 Modine Heater offers powerful performance to keep midsize spaces nice and toasty year-round. With a maximum output of 49,200 BTUs per hour, this Hot Dawg is an ideal three-car garage heater size, and it can also heat greenhouses, workshops, patios and other spaces up to 550 square feet. It operates at 82% efficiency to help you save money on utility costs.
Modine Hot Dawg heaters are available for propane or natural gas - just select the appropriate model above. The neutral paint scheme and quiet operation keep your Modine HD60 out of the spotlight. Angle brackets are included for ceiling installation, and you can also mount it on a sidewall or just leave it on the ground. Note a three-inch vent pipe is required.
Greenhouse Megastore has a Low Price Guarantee and free shipping so you can heat garages and greenhouses without torching your wallet. Every Hot Dawg heater is made in the U.S. and has a 10-year heat exchanger warranty.
Modine HD60 Hot Dawg Heater Features:
Wiring Diagrams (PDF)
|Model||Application||Input BTUH||Output BTUH||Vent Size||Weight (lb.)|
|HD30||1 to 1.52 Car Garage
or up to 250 SF Greenhouse.
|30,000||24,600||Requires 3" Vent Pipe||55|
|HD45||2 to 2.5 Car Garage
or up to 350 SF Greenhouse.
|45,000||36,900||Requires 3" Vent Pipe||60|
|HD60||3 to 3.5 Car Garage
or up to 550 SF Greenhouse.
|60,000||49,200||Requires 3" Vent Pipe||80|
or up to 650 SF Greenhouse.
|75,000||61,500||Requires 3" Vent Pipe||85|
|HD100||Up to 1000 SF.||100,000||82,000||Requires 4" Vent Pipe||125|
|HD125||Up to 1200 SF.||125,000||102,500||Requires 4" Vent Pipe||125|
Many of our customers happily report that purchasing a Hot Dawg heater from the Greenhouse Megastore helped them save 50% or more off the unit price received from a local HVAC installer. However, for safety reasons and to minimize installation problems, Modine strongly recommends having a licensed HVAC technician install your Hot Dawg heater. Although we are happy to offer limited technical support for your Hot Dawg purchase, we cannot install the heater for you over the phone nor are we able to troubleshoot problems you may experience if you choose to install the heater yourself. By purchasing this heater from us, you accept sole responsibility for installation and agree to abide by Modine's limited warranty.
Based on our experience in selling Modine Hot Dawg Heaters, we have written up a troubleshooting guide that deals with the issues we most commonly hear from customers. - Troubleshoot a Modine Hot Dawg
If you still need help, check out Modine's own troubleshooting guide.
Modine HD-Series vs. Sterling RF-Series
|Specification||Modine HD-Series||Sterling RF-Series||Comments|
|BTU Range||30 - 125 MBH||30 - 90 MBH||Modine covers more applications|
|Minimum Efficiency||80%||80%||Same non-condensing high efficiency|
|Blower Fan Units
(HDB model only)
|60 - 125 MBH||Not Available||Modine covers more applications|
|Casing Paint||Polyester Powder||Wet Enamel||Modine units will look better longer|
|Quiet Swept Wing Fans||100 and 125 MBH||Not Available||Larger Modine units are quieter|
|Heat Exchanger Gauge||18 Gauge||20 Gauge||Modine heat exchangers are heavier gauge|
|Optional Stainless Steel||Yes||Not Available||Modine covers more applications for corrosive environments|
|T.E. Fan Motor Standard||Yes||No||Modine motors are protected for longer life|
|Power Vented X-Changer Warranty
(HDS and HDC models only)
|10 Years||10 Years||Same 10 year heat exchanger warranty|
|Sep. Comb. X Changer Warranty
(HDS & HDC models only
|10 Years||5 Years||Modine separated combustion units warrantied longer|
|Component Warranty||2 Years||1 Year||Modine parts warrantied longer|
Modine offers a 10-year limited warranty on the heat exchanger and a two-year limited warranty on all other components. Please note this warranty covers parts only and does not cover any labor costs associated with repairing the heater. View Warranty (PDF)
It is the customer's responsibility to carefully inspect heaters for damage before accepting delivery since heaters are usually not returnable once delivery is accepted. Obviously damaged heaters should be refused - contact Greenhouse Megastore customer service to arrange for a replacement unit. Once delivery is accepted, Greenhouse Megastore will gladly provide replacement parts under the manufacturer's warranty to repair damaged or defective heaters. However, this warranty does not include any labor costs associated with installing these parts. Warranty issues should be diagnosed by a certified HVAC technician since parts deemed not to be defective by the manufacturer are not available for credit back to the customer. Specific warranty policies vary by manufacturer but typically cover replacement parts as indicated above up to one year after purchase. Please contact Greenhouse Megastore customer service if you have any questions about the warranty for your specific heater.
This item ships free via Motor Freight Carrier almost anywhere in the contiguous U.S.!
On rare occasions, addresses with limited access such as islands or major metropolitan areas (e.g. New York City) may incur additional delivery fees. If so, you will be contacted to confirm the extra shipping cost before your order is processed. Shipments to Alaska or Hawaii qualify for free shipping to any West Coast port. Please contact us for special shipping rates from the West Coast to Alaska or Hawaii.
I bought this for an oversize 3 car garage (36x26) that is insulated, but not highly. On fairly cold days (around 10) it will bring the temp up to 60 in about an hour. Noticeably warmer in 10 minutes or so. I have it in a corner, pointing to the opposite corner and it heats the entire area well. Be sure to read the instructions carefully for vent sizing. The attachment on the back is 3", so you may need to adapt up to 4" on many installations.
Installation tip: I purchased some eye bolts, hooks and nylon rope. Since I mounted it angled in the building, I installed 2x4's flat on the ceiling for mounting. I put the bolts with washers through the outside slots in the hanger rails and screwed the screw eyes in the side of the 2x4 at the mounting location. I tied the rope on an eye bolt and threaded it through the other eyes up and down. This left me with a single pull point to lift the unit close to position and tie it off. I could then get the permanent bolts started without having to hold the unit up at the same time.
Love this heater. I have a 3 car garage and it heats it real well. Solid construction and well built. Was shipped without a scratch and well packaged.
The heater with package is installed in the basement of the new addition. The addition has a garage door. The heater is quickly able to heat the basement after the garage door has been opened (temperature today is about 10 degrees F).
Compact, quiet and powerful, strong fan, looks like its finish will hold up better to greenhouse conditions than another (top rated) brand I replaced. ---G.H. Megastore charged Calif. sales tax but not shipping to home, so their's was the best deal --- did not deliver thermostat as promised with the original order, but did follow up when I called in.
heater is very smooth and runs quiet,has no problem heating my triple garage, it also looks very nice. If I have the opportunity I will recommend this heater to someone else. I had this heater recommended to me and am not disappointed.
the product is a proven commodity and the price and shipping were excellent. everything went as promised.
The Hot Dawg was easy to install and hook up. It worked great the first time it was turned on and every time since. I highly recommend this product to anyone looking for a great workshop heater.