30% Black Shade Cloth, Grommeted Panel
The edges of these panels are sewn with heavy-duty reinforcing tape. Brass grommets are installed on approx. 2' centers around the perimeter. Often includes a seam where two pieces of shade have been sewn together. Durable, easy to install with ropes, bungees or wire. Most durable solution for smaller areas where shade will be suspended between four points. Grommeted panels are sold in pre-cut sizes or can be ordered in any custom size.
A raw piece of shade fabric where edges of panel are not reinforced with any tape or grommets. Would not typically have a seam but may have a raw (cut) edge. Can be installed with wiggle wire, shade cloth clips or wooden lath. Precut Panels are sold in pre-cut sizes or can be ordered in any custom size.
Sold in factory widths by the linear foot. Would only rarely have a seam and sides typically include a factory finished (uncut) edge. Most cost effective solution for large quantities of shade fabric.
Can't find what you need?
Visit our Custom Shade cloth page to order a custom sized piece.
30% density will block out 30% of light. Constructed of high density polyethylene, the tough lock-stitch design of this knitted material resists rips, tears and fraying while reducing wind speed and heat build up in structure.
8 year prorated warranty against UV degradation
Depending on the size ordered, your shade fabric may contain a factory seam.
We guarantee our stock shade pieces will be within +/- 4" of the published dimensions. Accuracy has only very rarely been a problem, but keep in mind these variances.
|30%||Asters, Chrysanthemums, Geraniums, and Snapdragons|
|40%||Bedding Plants*, Gloxinias, Herbs*, Iris, Lilies, Vegetables*|
|50%||Bromeliads, Ficus, Orchids (Dendrobiums, Epidendrums, Vandas)|
|60%||Orchids (Oncidiums, Phalaenopsis)|
|70%||Ferns, Orchids (Cypripediums), Philodendron|
When hanging shade cloth pieces larger than 100 sq. ft., you may need extra center support to prevent the cloth from sagging in the middle. One easy way to do this is by running lightweight cable from corner to opposite corner, forming an X pattern that the cloth can rest on. For pieces larger than 400 sq. ft., you may need cables running end to end every 4' or so.
I am very pleased with this shade cloth. Study edging and strong grommets, along with high quality shade cloth, make this a great buy.
exact size, well made
I have purchased both 30 and 60% shade cloth over the last months and both have definitely saved my precious plants...the fabricated piece was perfect. Thank you
We are quite pleased with this product at this point. Seems very durable. We are using it over our tomato house. Thank you.
It is everything i wanted & more, love the costom made by tag! Thanks Patty!
This shadecloth is exactly what I expected. Perfect
The product, the service and shipping are great however I should have bought the 50 % shade cloth because of the heat we have in South Florida.
I'm using this 30% shade cloth to cover a portion of my yard where I grow succulents. It is just right for reducing the harsh full sunlight while allowing enough light in for the plants to grow well. Keeps plants from burning. Seems to be well made so far.
Convenient, prompt shipping, reasonably priced. Setting daylily seed pods in 100 degrees under this shade cloth